Depaepe Telecom HD Max Photos Mode D'emploi page 17

This code can be modified (see « LIST OF SETTINGS »
following pages)
7) If the right code is entered, 2 short « beep » tones will be heard
and the access to setting, changes will be authorized.
If a wrong code is entered, a low « beep » tone will be heard and the
unit will return to talk mode.
8) Enter the 2 digits selected setting access code (see « LIST OF
SETTINGS » following pages)
9) 2 sharp « beep » tones confirming the selection will be heard.
10) Enter your custom setting choice or the code or number to store.
11) Terminate your setting by depressing « PROG » key.
12) 2 sharp « beep » tones will confirm the storage of your new
setting.
13) For other settings, proceed with operations 2 up to 11.
Total Reset
General reset operation erases memories, access code and will return
all settings to factory settings (see « SETTINGS
PROGRAMMING » following pages).
1) Make sure the telephone is connected to a powered C.O. or
PABX line.
2) Handset in ON Hook mode. Depress the reset key with a pen
3) While keeping reset key depressed, pick-up the handset.
4) 2 sharp « beep » tones will be heard.
5) Release reset key.
6) Enter general reset code with the keypad or with the rubber keys
located inside the keypad grid: « 1-5-9 ».
16