Publicité
Fault
Possible cause
Motor does not start
a) No power
b) Switch, Condenser
c) Electrical extension cord is defective
Saw blade is not
a) Guide has been wrongly set
running straight
b) Wrong saw blade
Burn marks appear
a) Blunt saw blade
on the wood during
b) Wrong saw blade
the cutting work
Saw blade jams
a) Blunt saw blade
during cutting work
b) Deposits on the saw blade
c) Guide has been set poorly
Trouble shooting
Solution
a) Check mains connection
b) Have them checked by an electrical
engineer
c) Remove the plug from the socket, check
it, and replace if necessary
a) Set the saw blade guide according to the
operating instructions
b) Select a saw blade according to the
operating instructions
a) Change the saw blade
b) Select a saw blade according to the
operating instructions
a) Change the saw blade
b) Clean the saw blade
c) Set the saw blade guide according to the
operating instructions
international 33
Publicité
