Publicité
completely stop.
completing repair and maintenance procedures.
rectifying any malfunctions.
The current speed at the suction connection piece should
fore starting up.
rear of the machine.
does not turn.
the machine to the supply mains before recommissioning.
the plug or other parts are damaged.
Use only as authorized
The operator is responsible for all other persons in the
the machine.
28 international
-
nected to a vacuum exhaust unit. Use the dust extractor to
-
2-3 second delay after the machine tool is turned on. This
avoids overloading the circuit fuse.
-
remains on for an additional 2-3 seconds and is then auto-
-
erning hazardous materials. This results in savings in elec-
tricity consumption and reduces noise levels, as the vacuum
exhaust unit is on only during machine tool operation.
tions must be used for suction in commercial areas.
instructions set out in the operating manual, and only by
involved in operating the machine. Any functional disor-
ders, especially those affecting the safety of the machine,
tions and dimensions must be adhered to.
recognized safety-technical rules must also be adhered to.
-
cedures. Arbitrary alterations to the machine release the manu-
facturer from all responsibility for any resulting damages.
and original tools made by the manufacturer.
not responsible for any damages resulting from unauthor-
The machine has been built using modern technology in
Remaining hazards
-
-
-
-
-
-
-
-
Publicité
