Troubleshooting Guide - DeWalt D36000 Guide D'utilisation


CAUTION: The use of any other accessory not recommended for use with this tool could
be hazardous.
Repairs

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including power cord repairs, and brush inspection and replacement,
when applicable) should be performed by a D
authorized service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE: Registering your product will help you obtain more efficient
warranty service in case there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP: In case of an insurance loss, such as fire, flood or theft,
your registration of ownership will serve as your proof of purchase.
•
FOR YOUR sAFETY: Registering your product will allow us to contact you in the unlikely
event a safety notification is required under the Federal Consumer Safety Act.
Register online at www.dewalt.com
•
Three Year Limited Warranty
D WALT will repair or replace, without charge, any defects due to faulty materials or
e
workmanship for three years from the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty
repair information, visit www.dewalt.com or call 1-800-4-D
warranty does not apply to accessories or damage caused where repairs have been made or
attempted by others. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
AND EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damages, so these limitations may not apply to you. This warranty gives you
specific legal rights and you may have other rights which vary in certain states or provinces.
In addition to the warranty, D WALT tools are covered by our:
e
1 YEAR FREE sERViCE
D WALT will maintain the tool and replace worn parts caused by normal use, for free, any time
e
during the first year after purchase.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of your D
for any reason, you can return it within 90 days from the date of purchase with a receipt for a
full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products sold in Latin America. For products
sold in Latin America, see country specific warranty information contained in the packaging,
call the local company or see website for warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning labels become illegible or are
missing, call 1-800-4-D WALT (1-800-433-9258) for a free replacement.
e
Trouble!
Saw will not start
Saw makes unsatisfactory cuts
Cutting wheel does not come up to speed
Machine vibrates excessively
Does not make accurate cuts
WALT factory service center or a D
e
WALT (1-800-433-9258). This
e
WALT Power Tool or Nailer
e

Troubleshooting Guide

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR
PERSISTENT PROBLEMS, CONTACT A D
What's Wrong?
Saw not plugged in.
GFCI tripped.
Saw will not run (plugged in; switch on).
Fuse blown or circuit breaker tripped.
Cord damaged.
Brushes worn out.
Dull cutting wheel.
Water pump will not pump water.
Cutting wheel mounted backwards.
Build up on cutting wheel.
Incorrect cutting wheel for work being done.
Extension cord too small of a wire gauge or too long.
Arbor loose.
Low house voltage.
Saw not mounted securely to stand.
Stand or bench on uneven floor.
Damaged saw cutting wheel.
Cutting cart side attachment not secure to fence.
Cutting wheel is not square to fence.
Cutting wheel is not perpendicular to cart surface.
Workpiece moving.
WALT
e
WALT SERVICE CENTER OR CALL 1-(800)-4-D
e
What To Do
Plug in saw.
Push switch to off and push reset button on GFCI.
Push switch to off and push the reset button on the GFCI.
Push switch to off and replace fuse or reset circuit breaker.
Have cord replaced by authorized service center.
Have brushes replaced by authorized service center.
Replace cutting wheel. Refer to Installing the Cutting Wheel.
Remove water pump and spray with clean water to dislodge the impeller.
Turn cutting wheel around. Refer to Installing the Cutting Wheel.
Use dressing stone to remove build up.
Change the cutting wheel. Refer to Installing the Cutting Wheel.
Replace with adequate size cord. Refer to Minimum Gauge for Cord Sets.
Tighten arbor.
Contact your electric company.
Reposition water pan on stand.
Reposition on flat level surface.
Replace cutting wheel. Refer to Installing the Cutting Wheel.
Check and adjust. Tighten the side attachment knob.
Check and adjust. Refer to Cutting Wheel Parallel to Cart.
Check and adjust fence. Refer to Cutting Wheel Square to Cart.
Use side attachment and edge guide.
WALT.
e
English
9