Husqvarna RG 2112 Manuel D'utilisation page 19

SAFETY WARNINGS FOR OPERATION OF THIS MACHINE
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT operate this machine unless you have read and understood this operator's manual.
DO NOT operate this machine without all guards in place.
DO NOT leave this machine unattended while the engine or motor is running.
DO NOT work on this machine while the engine or motor is running.
DO NOT operate this machine when you are tired or fatigued.
DO NOT operate the machine if you are uncertain of how to run the machine.
DO NOT use damaged equipment or tool.
DO NOT touch or try to stop a moving tool with your hand.
DO NOT transport a machine with the tools mounted on the machine.
DO NOT use a tool that has been dropped or damaged
DO NOT touch the tools immediately after use. These tools require several minutes to cool
after operation.
DO NOT use damaged or worn accessory disk.
DO NOT allow other persons to be near the machine when starting, refueling, or when the
machine is in operation.
DO NOT operate this machine in an enclosed area unless it is properly vented.
DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause
a fire or an explosion.
DO NOT operate this machine while under the influence of drugs or alcohol.
DO NOT operate this machine with any of the guards removed.
DO NOT operate this machine unless you are specifically trained to do so.
DO NOT start operation of the machine until you have a clear work area and secure footing.
DO NOT use flammable substances, unsecured loads or people as extra weight. Injury to the
operator or other persons could result!
DO NOT use flammable, or improper substances to improve the material removal from the work area.
DO NOT operate the machine if unknown substances are on or near the work area.
DO NOT operate the machine before you determine the nature and volatility of any material that
will come in contact with the grinding tools used by this machine.
This machine was designed for certain applications only. DO NOT modify this machine
or use for any application other than for which is it was designed. If you have any
questions relative to its application, DO NOT use the machine until you have written
Husqvarna Construction Products North America and we have advised you.
WARNINGS
DOs and DO NOTs
***************************
19
Husqvarna Construction Products North America
Olathe, Kansas 66061, USA
17400 West 119th Street