Petromax d-ring Mode D'emploi page 8

Assembly
DE
Collect three intact branches in the surrounding area of your camp and adjust them slightly if necessary
EN
(max. 3.5 cm diameter). Insert them into the three openings of your Tripod Lashing. By slightly twisting
the disc and setting up the branches they are automatically fastened. That way within a short time, you
FR
obtain a durable tripod. The hook with thread is led through the single central opening and fastened
with the enclosed nut. Refasten the nut for each use and control a tight, secure fit before applying
load. You can now hang the corresponding chain together with the second hook and start outdoor
cooking with Dutch Oven and co.
1
Collect three intact branches and adjust them ifnec-
essary.
2
Insert the branches from below into the openings of
the Tripod Lashing, fasten the large hook.
3
Fasten the Tripod Lashing by twisting and by setting
up the branches, hang chain with second hook and
check if stable.
4
Set up fireplace underneath the Tripod Lashing and
get cooking.
8