Display Added Measurement Values; Delete Saved Measurement Values - SilverCrest SNAW 1000 A1 Mode D'emploi

Display added measurement values

GB

Delete saved measurement values

116
NOTICE
► You can save up to 99 measurements (M99). When the memory is full,
it no longer permits measurements to be saved. In this case, delete the
saved data: press the button
M99 (or the number of the last occupied memory space) extinguishes.
► If the nutritive value upper limit is reached with a memory input, "M" blinks
in the display 3 and no further measurements can be added.
You can retrieve the added measurement values at any time, for example, daily.
1) Press the button MR
In the display 3 appears the sum sign, the number of occupied save locations
and the added-up measurement values.
2) Using the function buttons 8 (except ON/OFF TARE
the nutrient and energy value.
NOTICE
► When the sum of the saved energy values exceeds 199999 kJ, or another
nutritive or energy value is exceeded, the display 3 indicates "E- - - - ".
After about 8 seconds, if no other buttons are pressed, the scales switches back
to the weighing mode.
NOTICE
► If you press the button
saved, the indicator "NULL" appears in the display 3.
When you wish to delete the saved measurement values, press the button
continuously until the number of the last occupied memory space extinguishes.
6 continuously until the indication
MC
C
5.
5 although no measured values have been
MR
) switch between
6
MC
C
SNAW 1000 A1