Velleman HQ Power VDSCD5000 Notice D'emploi page 9

11. SEARCH
Change the mode of the joggle wheel to a search mode. This button will remain active while the wheel is being
moved and for 8 sec after. Moving the wheel clockwise rapidly you will move forward through the music. An
anticlockwise rotation moves the music backwards. There are 2 search speeds depending upon wheel rotation
speed.
12. LOOP
A loop is any area of a CD that you choose to repeat with no breaks. On this unit 2 seamless loops are
possible. There are 3 buttons associated with the loop feature.
LOOP IN:
The loop in is where you wish the loop to actually start. The initial cue point of the CD is also the default loop in
point or hot start point for the loops. If you wish to set a new loop in point, just push the LOOP IN button while
the CD runs. The LOOP IN LED will light indicating a new loop is set. The HOT START LED will also illuminate
indicating a point has been set and is accessible. By default the loop in also becomes the stutter or hot start
point.
NOTE: The CD will always remember a new set point as the loop in or hot start point until you actually set a
new loop in point or insert a new CD. The new point will be accessible until you remove the CD from the unit. If
you change tracks and you previously set a loop in on another track, press RELOOP/STUTTER to jump to that
point.
LOOP OUT:
The loop out determines the end point of a loop. The first time you press LOOP OUT while a CD is in play
mode, the LOOP OUT LED will turn on and flash while the song automatically returns to the loop in point with
no breaks and continues play. When the song reaches the loop out point again it returns to the loop in point
and continues to repeat this action. You will notice the LOOP IN LED will also be flashing during loop action.
To release or end the loop press the LOOP OUT button a second time and play will continue forward when the
song passes the previously set loop out point. The LOOP OUT LED will light indicating that the loop is now in
memory for relooping purposes.
NOTE: The loop out point will be erased if LOOP IN is pressed or a new cue point is set after the loop out
point. This is important because without this point the reloop will not be possible.
MOVING LOOP POINTS:
The loop in point can be moved while the music is playing just by pressing LOOP IN button at the new desired
point. The next time loop out is reached the CD will return to this new loop in point. If LOOP IN is pressed after
the loop out point it will clear the loop out point. The loop in point can also be edited while paused. First hold
down the CUE button and press the LOOP IN button to move the loop in point. Next, rotate the wheel to
search for a new cue point and press the LOOP IN button again to set the new point. Check your point by
pressing the RELOOP/STUTTER button.
The loop out point can also be moved while a loop is playing. Press LOOP OUT button to release the old loop
out point and press it again when the new desired point has come.
RELOOP/STUTTER:
This button performs 2 different functions depending on loop setting. Reloop is only possible if the loop points
have been previously set. The RELOOP function automatically returns the music to the loop in point and will
play the loop until it is released with the LOOP OUT button.
STUTTER starts instant play from previously set hot points. Simply set your stutter (hot start) point by following
the directions for setting loop in. Remember the buttons serve also for the relooping functions. If a loop out has
been set the unit will also loop until released.
NOTE: The CD player will always remember a new set hot point until you actually set a new loop in point or
put in a new CD. The new point will be accessible until you remove the CD from the unit. If you change tracks
and you previously set a loop in on another track, pressing RELOOP/STUTTER will jump to that point.
13. AUTO BEAT TRACKER AND INTERLOCK MODE
This unit includes AUTO BEAT TRACKER function. It wills automatically tracks beats based upon a
combination of frequencies and rhythm patterns in the music. It shows BPM in the display of each side and
outputs 4 counts information about the music in a marching bar graph.
THE BAR GRAPH:
Most dance music and rock is set up in 4 beat increments called measures. Many of the features within this
device use this information for incredible results. It is important to understand the basic of how the beat tracker
VDSCD5000_v3 9 VELLEMAN