Velleman HQ Power VDSCD5000 Notice D'emploi page 7

1. PROGRAM
A sequence of songs is pre-programmed into the unit.
2. CONTINUOUS
The CD will play continuously through all tracks and then start over repeating the CD infinitely.
3. SINGLE
The unit is set to play just one track at a time.
4. TOTAL TACKS
Number of tracks available on the CD.
5. MASTER / SLAVE
Side dominance in interlock functions.
6. AUTO TRACK
The CD is set to AUTO start.
7. CUE
Flashes when the unit is setting a cue point. Active when the unit is paused at a cue point.
8. PAUZE
The unit is paused.
9. PLAY
The unit is actually playing a CD.
10. HOT 1 / HOT 2
Hot points have been set.
11. TIME MODE
ELAPSED: show the time as it is taking place.
REMAIN: show how much time is left on a particular track.
12. TIME BAR
Show either track time remaining, total CD time remaining or track elapsed time depending on the setting of
the TIME button.
13. KEY
Lights up when keys effects are active.
14. LOCK
Lights up when a key has been locked.
15. BPM
Indicate the current BPM and effect information.
16. KEY LEDs
Indicate key position.
17. FREE WHEEL
Indicate when the wheel will cue as a smooth transition over the music creating a scratch effect.
When not lit, the wheel will cue in the customary stutter style.
18. EFFECT
Indicate when the wheel is in effect mode.
19. TRACK
Show the track that the unit is playing.
20. MINUTES
Show the minutes elapsed or remaining depending on mode setting.
21. SECONDS
Show the seconds elapsed or remaining depending on mode setting.
22. FRAMES
The CD player breaks down a second into 75 frames for accurate cueing. This function shows the frames
elapsed or remaining depending on mode setting.
23. PITCH
Lights up when the pitch is active.
24. PITCH LEDs
Show the current pitch control.
VDSCD5000_v3 7 VELLEMAN