Bresser Thermo Hygro Quadro NLX Mode D'emploi page 6

• Disconnect the device from the power supply by pulling
• Position your device so that it can be disconnected
• To disconnect the device from the power supply, al-
• Before starting up the device, check the device, the
• Never use a damaged device or a device with dam-
• Only use the device in complete dry environment and
Danger of suffocation!
Improper use of this product may result in suffocation, espe-
cially for children. It is therefore imperative that you observe
the following safety information.
• Keep packaging materials (plastic bags, rubber bands,
• This product contains small parts that can be swal-
6 / 84
the power plug when it is not used or in case of longer
interruption of operation and before starting any work
on maintenance and cleaning.
from the power supply at any time. The power socket
should be installed near the device and should be eas-
ily accessible as the mains cable plug is used to dis-
connect the device from the power supply.
ways pull on the plug. Never pull on the cable.
cables and the connections for signs of damage.
aged live parts. Damaged parts must be immediately
replaced by an authorised service company.
do not touch it with wet or moist parts of your body.
DANGER
etc.) away from children! There is a DANGER OF
CHOKING [These pose a CHOKING HAZZARD]
lowed by children! There is a DANGER OF CHOKING
[These pose a CHOKING HAZZARD]