Information And Settings; Displaying Information; Displaying Settings - Bosch TCC78K751 Mode D'emploi

48 | English

Information and settings

Use (9) to display information (press briel y)
k
and adjust settings (hold down for at least
three seconds).

Displaying information

In the Info menu (press
call up the following information:
when it is necessary to descale the
►
appliance
when it is necessary to clean the
►
appliance
when it is necessary to change the i lter
►
how much coffee has been dispensed
►
since the appliance was i rst put into
operation
how many milk drinks have been
►
dispensed
how much tea water has been prepared
►
Descale after
100 cups
Bosch
TCC78K751_Heft1.indb 48
k (9) briefly) you can

Displaying settings

(
Hold down (9) for at least 3 seconds; the
k
different setting options are then displayed:
Language
English
Turn the rotary knob
the different setting options. The currently
active setting is always shown in the display
with brackets. You can change the setting
that is currently displayed by pressing the
arrow button (4). The brackets show the
p
English
new option, e.g.
new setting with the rotary knob. To exit the
menu, press (9) again.
k
The changes you have made are
saved automatically. It is not neces-
sary to coni rm them additionally.
The following setting options are available
to you:
Language
– : Press the arrow button
the knob to select the display language.
Per-cup quantities
– : The per-cup quantity
can be set separately for each type of
drink and each cup size ("Set per-cup
quantity" on page 50).
Descaling program
– : If you want to descale
the appliance, press
and run the descaling programme (see
"Descaling").
Cleaning program
– : If you want to clean the
appliance, press o
the cleaning programme (see "Cleaning").
)
}
(5) to switch between
. Now select the
. Turn
p
o start/stop (10)
start/stop (10) and run
TCC78K751 | 07/2011
28.06.2011 11:44:21