Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If no temperature level is programmed in a pe-
riod, the antifreeze function is active.
If the last period is active, program modifi ca-
tion is accepted.
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Modify towel warming programs (
Select the desired program and confi rm it.
►
Select the mODiFY menu item and confi rm
►
it.
The cursor is in the fi rst predefi ned period.
Select the new start and new end of the pe-
►
riod and confi rm each one.
If necessary, adjust the other periods in the
►
same manner.
Note: individual periods can be skipped
by pressing the acknowledgement button
twice.
If no programming is done within a period, an-
tifreeze function is active.
If the last period is active, program modifi ca-
tion is accepted.
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Delete program
The programmed day blocks and periods are
deleted. The program can be re-created. This
procedure is advisable for major changes.
Create program
Day blocks and periods (maximum 12 swit-
ching commands per day) can be defi ned, in
which regulation of room temperature or the
towel warming modes are active.
To recreate an existing program, it must be de-
leted beforehand.
Create room temperature regulation pro-
Create room temperature regulation pro-
grams (presence
Select the desired program and confi rm it.
►
Select the create menu item and confi rm
►
it.
Defi ne the day block by pressing the ack-
►
nowledgement button.
18
,
, P1, P2, P3)
To add additional days to a day block, select
►
aDD. DaYS and confi rm it.
When you have added all desired days to a
►
day block, select enter time.
Select the start of the fi rst period and con-
►
fi rm it.
Select the desired room temperature level
►
(comfort temperature or reduced tempe-
)
rature ) and confi rm it.
Select the end of the fi rst period and con-
►
fi rm it.
If necessary, adjust the other periods in the
►
same manner (enter time).
If no temperature level is programmed in a pe-
riod, the antifreeze function is active.
If necessary, adjust the additional day blocks
►
in the same manner (neW DaY BlOcK).
Conclude programming with SaVe & Quit.
►
If there is no input within a period of 4 mi-
nutes, all inputs are discarded and the thermo-
stat goes back to the previous program state.
Create towel warming programs (
When creating the towel warming pro-
►
grams, proceed in the same manner as
creating programs for room temperature
regulation.
Periods are determined for the preset heater
level.
Antifreeze function is active between the pro-
grammed periods.
Factory settings programs
This menu item is available only after mo-
difying, deleting or creating a program and
restoring the factory setting.
Menu – options
Info
Display of type, device number and software
status.
Factory settings
Resets the entire device to factory settings
(date and time remain intact).
,
)
Publicité
Table des Matières
