Control And Indicator Elements - Arbonia WFC Instructions D'utilisation

Commissioning / changing the battery
The thermostat operates with 4 batteries 1.5 V
of the type LR6 or AA.
Do not use rechargeable batteries.
Remove the housing cover (9) (see Fig. F1).
►
Insert the batteries. Pay attention to the
►
correct polarity.
Fit the housing cover (9) again (see Fig. F2).
►
Make the basic setup (language, Date,
►
time –> see menu / Setup)
Note: in case of empty batteries, the thermo-
stat no longer sends radio signals to the recei-
ver.
If no radio signal is received for a longer peri-
od, the receiver switches off the heating ele-
ment due to safety reasons. However, the an-
tifreeze function remains active in the receiver
via a temperature sensor.
Battery display
Batteries full
Batteries half full
Batteries must be replaced soon
Batteries are empty and must be
changed

Control and indicator elements

4 7
5 6 8
1 Boost button/acknowledgement button
2 Knob
3 Light ring
4 Presence button
5 Absence button
6 Auto button
7 Menu button / return
8 Info button/ child lock
9 housing cover
Boost button/acknowledgement button (1)
In the operating mode:
•
press once –> to activate the
boost mode
•
press once again –> to end the
boost mode and return to the
previous program
In the menus:
•
Acknowledgement button
Knob (2)
In the operating mode:
•
Change of temperature setpoint
(manual program)
In the menus:
•
Select the menu items or set the
parameters
Light ring (3)
Blink:
•
Confirmation request
1 2 3
9
13