Technical Characteristics - PRESIDENT Valery Classic Manuel D'utilisation

RX indicator (green) lights up when the receiver is in operation and TX indicator (red) lights
when the transmitter is in operation.
10)DISPLAY:
The display shows all the different functions. The bargraph shows the level of reception
and the level of power emitted.
11)RF GAIN:
This knob is for adjusting sensitivity during reception. For long distance communications
RF GAIN should be set to maximum. RF GAIN can be reduced to avoid distortion, when
your correspondent is close by and when he does not have RF POWER.
The normal setting of this knob is on maximum (fully clockwise).
12)MIC GAIN:
Is for regulating microphone sensitivity, when using a microphone other than the one
supplied with your PRESIDENT VALERY (pre-amplified).
The normal setting of this knob is fully clockwise.
13)6-PIN MICROPHONE PLUG:
See the cabling diagram on page 46.
14)PTT (push to talk):
Depress this knob to transmit a message and release to listen to an incoming
communication. See the cabling diagram on page 46.
A) DC-POWER TERMINAL (13,2 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL S-METER JACK (Ø 2,5 mm)
D) EXTERNAL SPEAKER JACK (8 Ω Ω Ω Ω Ω , Ø 3,5 mm)
E) PA SPEAKER JACK (8 Ω Ω Ω Ω Ω , Ø 3,5 mm)
C) TECHNICAL CHARACTERISTICS:
28