HQ Power VDPLW2300 Notice D'emploi page 6

the cursor is flashing after the letter "f", press the wheel and adjust the fade time of chase 8. Press again to
confirm. When the cursor is flashing after the letter "s" (Chase 8 s_*** f **), press the wheel and adjust the speed
of chase 8. Press again to confirm. Repeat this operation to program chases 1 ~ 7.
DMX Mode Group
The LEDs of your VDPLW2300 are evenly divided into 8 square blocks, which can be grouped. To set a group,
press the jog wheel and scroll to DMX Mode 3channel/6channel. Press the wheel again to enter. Rotate the wheel
to the right to select the 6-channel mode; rotate to the left to select the 3-channel mode.
DMX protocol for the 3-channel mode:
DMX protocol for the 6-channel mode:
Combination of Group and Channel Mode
o 8-block/3-channel mode: 1 group of 8 blocks, each block consisting of 3 channels
CH CH
1-3 1-3
o 4-block/3-channel mode: 2 groups of 4 blocks, each block consisting of 3 channels, each fixture has 6
channels
CH CH
4-6 4-6
VDLPW2300
DMX Channel Function
Channel 1 0 ~ 100% dimmer RED
Channel 2 0 ~ 100% dimmer GREEN
Channel 3 0 ~ 100% dimmer BLUE
DMX Channel Function
0 ~ 4 no function
5 ~ 5 full on
Channel 1
6 ~ 247 effects
248 ~ 255 full on
Channel 2 0 ~ 255 dimmer RED
Channel 3 0 ~ 255 dimmer GREEN
Channel 4 0 ~ 255 dimmer BLUE
0 ~ 4 no function
Channel 5 5 ~ 253 strobe from slow to fast
254 ~ 255 full on
0 ~ 4 no function
5 ~ 30 program 1
31 ~ 60 program 2
61 ~ 90 program 3
91 ~ 120 program 4
Channel 6
121 ~ 150 program 5
151 ~ 180 program 6
181 ~ 210 program 7
211 ~ 240 program 8
241 ~ 255 sound activation
CH
1-3
CH
4-6
CH CH
1-3 1-3
CH CH
4-6 1-3
6
CH CH
1-3 1-3
CH CH
1-3 1-3
CH
1-3
CH
1-3
HQPOWER