Unpacking The Appliance; Overview Of The Components - ProfiCare PC-BS 3040 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
• Do not use the appliance in damp rooms!
• Never use without the filter. Check that the filter is inserted cor-
rectly!
• Keep hair, clothing and body parts away from the vacuum nozzle
during use!
• Keep the vacuum cleaner away from sources of heat like radia-
tors, ovens, etc.!

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove both protection parts from the bottom of the
appliance.
3. Check the delivery scope for completeness.
4. Check the appliance for any transport damage, in order
to prevent hazards.
NOTE:
In case of any transport damage, contact your dealer
immediately. Do not use a damaged appliance!

Overview of the Components /

Scope of Delivery
1 Air slide
2 Handle
3 Suction hose
4 Connection head of the vacuum hose
5 Hose connection
6 Dust collector base plate
7 Dust container
8 Cover lock (Filter unit)
9 Carrying handle
10 Dust collector release button
11 Cable-winding button
12 Suction power control
13 Ventilation grill lock (Filter unit)
14 Mains power supply cable
15 Positioning aid
16 On / off switch
17 Carpet / hard floor selector
18 Floor nozzle (with hook (not shown))
19 Telescopic suction tube
20 Parquet brush
21 Combined crevice and brush nozzle
Not shown
Turbo brush
PC-BS3040_IM
Start-up
• Insert the connection head of the suction hose into the
hose connector until it locks in place. To do so, please
press the buttons simultaneously.
• In order to release the hose again, please press the
buttons once more on the connection head. Keep the
buttons pressed down and then pull out the hose.
• Insert the vacuum tube into the handle if required.
• Then assemble the floor nozzle and / or the accessories.
To detach the nozzle attachments from the suction pipe,
pull them off by turning them slightly.
Nozzle Attachments
Floor Nozzle (18)
The floor nozzle features castors for easier movement.
You can clean smooth surfaces and carpets with the floor
nozzle.
• Adjust the brushes outwards or inwards using the
lever (17).
Best use of the appliance depends on the texture of the
floor covering. We recommend the following use:
• Use without brushes:
For vacuuming floor coverings
with a deep pile
• Use with brushes:
For vacuuming smooth floors
and carpets with a shallow pile
Parquet Brush (20)
For gentle cleaning of sensitive hard floors like parquet,
laminate, tiles, etc.
37
12.06.19

Publicité

Table des Matières
loading

Table des Matières