Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.1
TO REGISTER THE CAMERA ON YOUR OWN NETWORK
1.
Press the Settings button
2.
Now press the WIFI networks button
3.
The camera starts searching for available WIFI networks. Select your own WIFI network and enter the
correct password.
4.
Disconnect the LAN cable. If the battery is sufficiently charged the camera will now connect to the
WIFI network. If the battery isn't sufficiently charged, the camera will attempt to make the connection
but fail to do so. Please wait until the battery is sufficiently charged.
5.
The camera will now register itself through the WIFI network on your own WIFI network.
6.
Launch the app to make contact with the camera.
Note: The operation screen may differ somewhat between iOS and Android.
4.0
OVERVIEW
in the overview screen.
.
battery compartment
reset button
reboot LEDs
Microphone
infrared button
Camera
push-button
activation indicator
speaker
terminal block (power and UTP plug)
- 48 -
Publicité
Table des Matières
