KERN MPD 250K100NM Mode D'emploi page 38

Procedure:
 Switch off the balance.
 Press adjustment switch and turn on weighing scale by operating foot switch
(chap. 3)..
 Wait until the size of the adjustment weight (see chap. 1) required is displayed.
 Place adjustment weight in the centre of the weighing platform. Wait until „Ld 0"
is shown.
 Take away adjustment weight. Ensure that there are no other objects on the
weighing pan.
 Wait for a few seconds until „PASS" is displayed.
 After successful adjustment the balance automatically returns to weighing
mode.
18 MPD-BAPS-e-1811