Rear Panel - AKG DMS Tetrad Mode D'emploi

Description
6

Rear panel

DSRTetrad
Figure 2: Rear panel controls on the DSRTetrad receiver
8 Antenna connectors: Serve to connect the detachable antennas (7) or external antennas.
9 DC IN jack 12 V, 0.5 A: For connecting the provided AC adaptor.
10 Strain relief: For the supply cable of the provided AC adaptor.
11 INTERFERENCE PROTECTION switch: For adjusting the internal interference protection.
12 Channel Out/balanced (x 4): Balanced audio output on 3-pole XLR jack. This output
transmits the audio signal of the respective channel. You can connect the microphone inputs on
a mixer to these outputs, for example.
13 Sum output control to regulate the audio level by +20 dB.
14 MIX OUT/balanced (x 1): Balanced audio output on 3-pole XLR jack. This output transmits
the combined audio signal of all 4 channels and you can connect it directly to an active speaker.
14
13
12
11
9
8
10
DMSTetrad