PRO-PULSE 6113.468 Manuel De L'utilisateur page 48

Bdal 6113.468 07.12.2009
OPERATION
Routing without safety shield, and/or fence
Some jobs require that you rotate the safety shield out of the way and
remove the fence.
Using the router without the safety shield and fences in
place can lead to serious personal injury. Use appropri-
ate personal protective equipment whenever routing with
the safety shield removed. Use extreme caution:
Operate the router without safety shields
and fences ONLY when absolutely necessary,
and with ballbearing-guided-type router bits.
Inside routing
See Figure 19
1. Place your workpiece on the tabletop relative to the router bit.
2. Feed your workpiece through the bit in the direction of the arrow.
Always feed against the router bit's direction of rotation.
Outside routing
See Figure 20
1. Place your workpiece on the tabletop relative to the router bit.
2. Feed your workpiece through the bit in the direction of the arrow.
Always feed against the router bit's direction of rotation.
48
12:24 Uhr Seite 48
Fig. 19
Fig. 20