Securing The Router Table; Switch Box - PRO-PULSE 6113.468 Manuel De L'utilisateur

Bdal 6113.468 07.12.2009

SECURING THE ROUTER TABLE

DO NOT use the router table unless it is firmly mounted
to a stable work surface. Failure to securely mount
the router table could lead to serious personal injury
and/or property damage.
See Figure 9
1. Secure router table to the work surface using wood screws or sheet
metal screws and washers (not provided) through the holes in the bottom
of the legs.

SWITCH BOX

Introduction
See Figure 10
A conveniently located Switch Box allows the operator to:
• turn the router ON and OFF from the front of the table
• simultaneously operate other devices such as a light or a vacuum
It also features a resettable, internal circuit breaker that protects your
equipment against overloads.
Electrical Hookup
See Figure 11
Proper grounding diverts potentially dangerous electricity away from the
operator. The switch box is intended for use with a three-prong, grounded
outlet. The switch box's electrical cord features an equipment-grounding
connector and a grounding plug. Insert the plug into an accommodating
outlet that conforms to all local electrical codes and the Canadian Electric
Code.
40
12:24 Uhr Seite 40
Reset button
O U
T L
E T
S
P U L
L O
N
P U S
H O
F F
R E S
E T
Fig. 9
Fig. 10
Fig. 11