Environmental Protection - stayer HDBL181K Instructions D'emploi

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC.
Nickel-cadmium-bat-
tery: If your product is
equipped with a nickel-cad-
mium-battery, the battery
must be collected, recycled
or disposed of in an envi-
ronmentally-friendly way.
Nickel-metalhydrid-bat-
tery: If your product is
equipped with a nickel-
metalhydrid-battery,
battery can be disposed of
through the local waste
disposal system for solid
waste materials.
ENGLISH
24
Specifications
= Rated power input
V
= Load speed
rpm
= Percussion
ipm
= Percussive energy
= Maximum drilling, steel
= Maximum drilling, stone
= Maximum drilling, wood
= Weight
kg
= Battery Capacity
= Battery charging time
L = Sound power level
WA
L = Sound pressure level
A
P
= Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these
the
values can vary. Please observe the article number on
the type plate of your machine. The trade names of the
individual machines may vary.
Warranty
Warranty card
Included in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and return to vendor with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: If you cannot find the warranty card within the
documentation, you must ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired other than the manufacturer.
24