InnoCigs ESPION SOLO BOX Manuel D'utilisation page 77

INNOCIGS ESPION SOLO – SELECTING & OPERATING THE MENUS
Press COIL to lock or unlock the resistance in TC/TCR modes. Select the symbol of the
closed lock to lock and the symbol of the open lock to unlock the resistance.
Note:
1. This function should only be used at room temperature, to ensure that the correct "base resistance" is locked
2. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in TC-Ni, TC-Ti, TC-SS or TCR (M1, M2,
M3) modes, the device will automatically switch to VW Mode.
Press POWER to adjust the output power in the temperature-controlled modes TC/TCR
within a range of 1 to 80 watts. Swipe over the touchscreen from the left to the right to
return to the menu for further settings
Note:
In temperature controlled modes, the device will adjust the output power automatically depending on the selected temperature.
The value you set determines, which power the device starts to fire with. It is a kind of preheat function as well.
75