Using The Device - InnoCigs ESPION SOLO BOX Manuel D'utilisation

INNOCIGS ESPION SOLO – USING THE DEVICE
Operating Instructions
Fully charge the necessary and replaceable 21700/18650 battery before first use. Please take note of the positive and
negative poles in the battery compartment. Ensure that there is no visible damage to the surface of the battery cell. The
device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety of sub-ohm-capable
clearomizers.
Tips for Cleaning
Use a dry cloth or cotton swab to clean the device.
How to install the Battery
Open the magnetic battery compartment by simply pulling it off. Then place the charged 21700/18650 battery in the device
according to the poles indicated. If you want to operate the device with a 18650 cell, please use the included silicone-battery
sleeve. It is placed via the positive pole of the cell. Close the battery compartment.
Note: If the display does not light up after switching the device on, make sure that you have inserted the batteries correctly
and that they have sufficient power. If the device still cannot be switched on despite fulfilling all the aforementioned prere-
quisites, please contact our customer service department.
65