Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Table of contents
Specifications
Specifications are subject to change without notice.
Specification
Collection optics
Light source
Flow rate
Measurement range (10% optical
coincidence)
Optical Coincidence
Maximum operating pressure
Seals
Temperature range
Relative humidity
Input/Output
Details
Forward light scattering and light-
obscuration
810 to 852 nm, 50 mW Class 3B laser
60 mL/min
0.5 to 350 μm
10% at about 7500 particles/mL
1034 kPa (150 psi) water
517 kPa (75 psi) chemical
™
Kal-Rez
Operating: 7 to 52 °C (44.6 to
125.6 °F); Non-Operating: 0 to 71 °C
(32 to 159.8 °F)
Operating: 30 to 95% (non-
condensing); Non-Operating: 0 to 98%
(non-condensing)
Counter Control and Signals: 15 pin D-
Sub (male)
Specification
Power requirement
Weight
Sample temperature limit
Liquid Sample Types
Regulatory Compliance
General information
In no event will the manufacturer be liable for direct, indirect, special,
incidental or consequential damages resulting from any defect or
omission in this manual. The manufacturer reserves the right to make
changes in this manual and the products it describes at any time, without
notice or obligation. Revised editions are found on the manufacturer's
website.
± 15 VDC (furnished from the counter)
24.77 cm L x 6.35 cm H x 5.72 cm W
(9.75" L x 2.5" H x 2.25" W)
0.9 kg (2.0 lb)
65 °C (105 °F) (Based on sample
temperature of 65 °C + 25 °C (safety
factor).Special considerations apply to
samples with fire points below 90 °C)
Samples with fire points above 90 °C
(Special considerations apply to
samples with fire points below 90 °C)
Class 1 Laser Product
US FDA Laser Accession No.
8921539-005
European standard: EN 60825-1
CE compliant (Contact manufacturer
for compliance details)
English 3
Publicité
Chapitres
Table des Matières
Dépannage
