Evolution DWS 225 Manuel D'instruction page 2

Evolution Power Tools reserves the right to make improvements and modifications
to the design and technical specification of this product without prior notification.
DRY WALL SANDER - SPECIFICATIONS
Power (230V ~ 50Hz) (Watts):
Spindle thread
RPM Rated speed (min -1 ):
Recommended Maximum Duty Cycle (Minutes):
Abrasive paper size (Diametre mm):
Telescopic tube adjustment (metres):
Dust extraction hose length (metres):
Inbuilt torch:
Weight (kg):
Noise & Vibration Data:
Sound Pressure LPA:
Sound Power Level LWA:
Vibration Level:
Vibration declaration according to EN60745
The following information:
• that the deciared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another;
• that the deciared vibration total value may also be used in a preliminary
assessment of exposure
A warning:
• that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used;and
• of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EF225DWSLED DWS DFI.indd 2
710
M14
Max 1700
15
225
1.42-1.9
4
3 High Intensity LED
4.5kg Net / 7.4kg Gross
88.17dB(A) K=3dB(A)
99.17dB(A) K=3dB(A)
0.635m/s K=1.5m/s
2
2
2
07.03.13 13:59