Alesis MultiMix 8 FireWire Manuel D'utilisation Du Propriétaire page 3

QUICK START OWNERS MANUAL
1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Study this setup diagram.
4. Place the MultiMix in an appropriate position for operation.
5. Make sure all devices are turned off and all volumes are at "zero."
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Connect the Firewire cable to a computer.
9. Plug your MultiMix and other devices into AC power.
10. Switch everything on in the following order:
•
Audio input sources
•
External effects, recording devises or equalizers
•
The MultiMix FireWire
•
Amplifiers
•
Computer
11. When turning off, always reverse this operation by:
•
Turning off computers
•
Turning of amplifiers
•
Turning off the MultiMix FireWire
•
External effects, recording devises or equalizers
•
Last, any input devices
12. Go to http://www.alesis.com/ for product registration.
MULTIMIX FIREWIRE
(ENGLISH)