Advanced Features; Configuring Many Clocks; Re-Configure The Clocks; Saving The Configuration (Gt Network Manager Mobile) - Gorgy Timing HANDI Mode D'emploi

4.1. CONFIGURING MANY CLOCKS

► Using the tablet + GT Network Manager Mobile: You just have to tap every clock you
want to configure in the list of detected clocks in the "status" tab.
► In the « Deploy tab », tap the « Send this configuration » button to automatically confi-
gure all the clocks in the list. If the clocks are not within range (and so not detected),
you can also use their serial number to add them to the list. ( See the « deploy » tab )
► Without the tab (manual settings): repeat all the steps described in 3 for each clock.

4.2. RE-CONFIGURE THE CLOCKS

► Using the tablet + GT Network Manager Mobile: Connect the tablet to the same Wi-Fi
network as the clocks, and use the « Network scan » feature to add them to the list.
► Without the tab (manual settings) : repeat all the steps described in 3.2. for each clock.

4.3. SAVING THE CONFIGURATION (GT NETWORK MANAGER MOBILE)

► In the GT Network Manager Mobile application, it's possible to save the configuration to
use it back later. Use these buttons:
: Save the configuration
: Load the saved configuration

4.4. ROAMING CONFIGURATION (GT NETWORK MANAGER MOBILE)

► In the GT Network Manager Mobile application, you can check the « loop » checkbox
in the « deploy » tab. The configuration of the clocks will repeat itself until all the clocks
on the list are configured.
This enables the user to deploy a configuration at a large scale (building), just by moving
with the tablet. As soon are the clocks are in range, they are automatically configured.
MDE-option_Wi-Fi_horloges_HANDI_LEDI-1103V1.0
4. ADVANCED FEATURES
27