HI-Q TOOLS 60150700090 Mode D'emploi page 5

EN
USE
Before using the HI-Q TOOLS single arm stand check if your motorcycle generally fulfills the condi-
tions to be lifted by the HI-Q TOOLS single arm stand. The max. load capacity is 150 kg – therefore
the total weight of the two-wheeler incl. accessories may not exceed 300 kg. The rear swinging
fork has to be shaped in order to fit the HI-Q TOOLS single arm stand. If the rear wheel shall be
demounted, the axle has to be loosened before jacking up the motorcycle. The same is valid for
other tightened boltings on the two-wheeler. Never jack up the motorcycle alone – let yourself help
by a second strong person, keeping the motorcycle on the handlebar in vertical position. Lifting the
two-wheelers if it is standing inclined on the side stand, can damage the HI-Q TOOLS single arm
stand and may cause the vehicle to slip off.
Never sit on a lifted motorcycle.
Thus we can guarantee the correct mounting and use of the product.
POLO Motorrad und Sportswear GmbH
41363 Jüchen – www.polo-motorrad.de