The 6 control lights indicate the status of the appliance.
a) All lights are off = stand-by mode.
b) One light is on = the relevant programme is running.
c) One light flashes = Pause - mode.
6.3 Subsequent addition of dishes
❖ You can put dishes later in the appliance unless the detergent container has
opened.
1. Open the door slightly to stop operation.
2. You can open the door completely after the rotating spray arms stopped
operation.
3. Now you can add dishes.
4. When you close the door, the appliance starts operating after 10 seconds.
6.4 End of a programme
❖ When the display indicates "-" and the acoustic signal sounds 6 times, the
programme has ended.
1. Switch off the appliance (ON/OFF button).
2. Turn off the water.
3.
CAUTION! Wait a few minutes before you open the door as hot
damp may escape.
4. Wait approx. 15 minutes before you take out the dishes. The dishes are still hot
and will break easily.
5. It is normal that the appliance is wet inside.
7. Cleaning and maintenance
WARNING! Disconnect the appliance from the mains before you clean
or maintain it. RISK OF ELECTRIC SHOCK!
CAUTION! When a rinse cycle has been completed, wait at least 20
minutes before cleaning the interior of the appliance so the heating
elements can cool down.
NOTICE! Never operate the appliance without the filter inserted properly.
~
~
79