Starting Of A Programme; How To Change A Running Programme - Pkm DW12-6FI Mode D'emploi

Programme Information
programme
Rapid
soiled dishes
Pre-wash wash them at
a later point

6.1 Starting of a programme

1. Fill the lower rack first.
2. Pour the dishwasher detergent and the water softener (=dishwasher salt) in the
relevant containers.
3. During operation, the appliance must be supplied with water (full water pressure).
4. Close the door properly while pressing gently. When the door closes properly you
will hear a light KLICK.
5. Press the PROGRAM button to select a programme.
6. Press the OFF button when the programme has ended. Open the door.

6.2 How to change a running programme

CAUTION! While the appliance is operating it is dangerous to open its
door as hot water may spurt out. RISK OF SCALDING!
You can only change a programme when it has run a short period of time.
Otherwise, the detergent has dissolved and the dishwater has been
drained. In such a case you must refill the detergent container.
1. Open the door and press the current programme selection for at least 3 seconds.
2. Set the new programme.
3. Close the door.
When you open the door while the appliance is operating, the appliance will stop
operating. The display indicates the code E1. When you close the door again, the
appliance will start operating after 10 seconds.
Description
Short
for lightly Main wash (40
Hot rinse
without
drying.
For rinsing
dishes to
of time.
Detergent
PW/MW
0 )
Pre-wash
~ ~
78
Duration-
consumption
Min.-kW/h-L
25 g 37-0,50-7
- 8-0,01-4