Emergency Information - Abicor Binzel 20G Mode D'emploi

4 Components

3.2 Emergency information

4 Components
• TIG welding torches AUT-WIG ready-to-connect (without equipment) • Operating instructions
For the TIG welding torch AUT-WIG to function properly, you will need equipment parts tuned to the
particular torch type and electrode diameter. Suitable equipment kits are available for these equipment
parts. The following items must be ordered separately:
• Equipment kit
Tab. 5 Components
EN - 6
NOTE
Describes the risk of impairing work results or the risk that may result in
material damage to the equipment.
In case of emergency, immediately interrupt the following supplies:
• Power
Further measures can be found in the "Power supply" user manual or in the
documentation of further peripheral devices.
Order data and part numbers for the set-up and wearing parts can be found in
the current ABICOR BINZEL spare and wearing parts lists. The contact for
consulting and ordering can be found in the Internet at www.binzel-abicor.com.
AUT-WIG
• Tungsten electrode