When AutoOpen is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
check the remaining time of
the running programme,
look at the control panel
display.
4. CONTROL PANEL
On/off button
1
Navigation key (up)
2
Display
3
Option key
4
4.1 Key behaviour
Navigation keys (up and down)
• Use these keys to scroll the lists and
information texts that show on the
display.
Option key
• Short press will enter the option list.
• Short press in the option list takes you
back to the programme list.
• Short press in the settings list takes
you back to the option list.
• Long press (3 sec.) when a delay start
or a programme is running will delete
1
2
6
3
OK key
5
Navigation key (down)
6
the delay start, the programme and
options. The display shows the default
programme: ECO.
OK key
• Short press: Confirms the selection of
the programme, options and settings.
• Long press: Starts the MyFavourite
programme.
If no programme has been saved it
will display the setting Set
MyFavourite.
ENGLISH
33
4
5