AEG FSK93800P Notice D'utilisation page 37

Masquer les pouces Voir aussi pour FSK93800P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Press the OK key to change the value
from ON to OFF or vice versa.
6. Press repeatedly the Option key until
the display shows the programme
list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value.
7. Press the OK key to confirm.
8. Press repeatedly the Option key until
the display shows the programme
list.
6.4 Starting the MyFavourite
programme
1. Press and hold OK for about 3
seconds until the display shows the
MyFavourite setting.
2. Close the appliance door to start the
programme.
6.5 How to save the
MyFavourite programme
You can only save 1 programme at a
time. A new setting cancels the previous
one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select MyFavourite.
5. Press the OK key.
The display shows the programme list.
6. Select a programme.
7. Press the OK key.
8. The display shows Add option and
Done.
• Select Done if you want to save a
programme without options and
press the OK key.
• Select Add option to add an
option to the programme and
press the OK key to confirm.
Once an option has been
selected the display shows Add
option and Done. If you want to
select another option select again
Add option otherwise select
Done.
9. Press the OK key.
If the programme has the TimeSaver
option, you have to select Fast or
Normal.
10. Press the OK key to confirm.
The display confirms that the
MyFavourite programme has been
saved.
6.6 AutoOpen
AutoOpen improves the drying results
with less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
AutoOpen is automatically activated with
all programmes excluding Prewash.
To improve the drying performance refer
to the XtraDry option or activate
AutoOpen.
ENGLISH
37

Publicité

Table des Matières
loading

Table des Matières