Capturing An Image; Switching Off Led Lights - Schweizer eMag 50 HD Notice D'utilisation

Capturing an image

Capturing an image on the LCD screen can be useful for reading labels on objects or supermarket shelves.
By holding the eMag 50 HD close to an object and capturing the image, you can then hold the eMag 50 HD
closer to you to read the information.
1. Press the red button
If desired, press the yellow PLUS button
the size of the image.
2. Press the red button
Note: To save a captured image, press and HOLD the red button
information under Saving and deleting an image –> on page 26.

Switching off LED lights

When you power on the eMag 50 HD, the LED lights also switch on. To avoid glare when looking at reflective
surfaces, you can switch off the LED lights:
1. Press and HOLD the green/yellow button
The LED lights turn off.
2. To switch the LED lights on again, press and HOLD the green/yellow button
button .
22
to capture an image.
to magnify the image or the yellow MINUS button
again to exit the image capturing mode and return to live view.
and then press the red button
for 3 seconds. You will find further
.
and then press the red
to reduce