Philips VisaPure Advanced SC53 Série Mode D'emploi page 12

6 Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as alcohol or acetone to clean the appliance.
6.1 Cleaning the appliance and the brush
Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the brush head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1
2
3
4
6.2 Cleaning the adapter and the charging
A
Always keep the adapter dry. Never rinse it under the tap or
immerse it in water.
1
2
3
12
22_100_2532_2_DFU-Redesign_A6_v1.indd 12
head
Rinse the appliance and the brush head under the tap with
warm water and mild soap (max. 40ºC / 104ºF) (Fig. 11).
Remove the brush head from the appliance. (Fig. 12)
Clean the back of the brush head and the connection pin of the
appliance under the tap at least once a week (Fig. 13).
Dry the brush head and the appliance with a towel.
stand
Danger:
Make sure the adapter is unplugged when you clean it.
Only wipe it with a dry cloth.
Always detach the charging stand from the adapter before you
clean it (Fig. 14).
You can clean the charging stand with a moist cloth. Dry the
charging stand before you reconnect it to the adapter (Fig. 15).
18/05/15 09:08