Cleaning The Condenser; Cleaning The Humidity Sensor; Cleaning The Drum - Zanussi THE7201 Notice D'utilisation

CLEANING THE CONDENSER

1.
3.
5.
2 2
CAUTION! Do not touch the metal
surface with bare hands. Risk of injury.
Wear protective gloves. Clean
carefully to avoid damaging the metal
surface.

CLEANING THE HUMIDITY SENSOR

CAUTION! Risk of humidity sensor
damage. Do not use abrasive materials
or steel wool to clean the sensor.
To assure best drying results the appliance is
equipped with metal humidity sensor. It is placed
on the inner side of the door area.
Over usage time the surface of the sensor may get
dirty what deteriorates the drying performance.
We recommend to clean the sensor at least 3 or 4
times or if you observe the drop of drying
performance.
To clean you can use harder side of dish-washing
sponge and bit of vinegar or dish soap.
To clean the sensor:
1. Open the loading door.
2. Clean the surfaces of the humidity sensor
wiping off the metal surface several times.
16
1 1
2 2
1 1
2.
1
4.
6

CLEANING THE DRUM

WARNING! Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to clean the
inner surface of the drum and drum lifters. Dry the
cleaned surfaces with a soft cloth.
CAUTION! Do not use abrasive
materials or steel wool to clean the
drum.
2