Care And Cleaning - AEG BCB331051M Notice D'utilisation

20 www.aeg.com
Food
Apricots
Apple slices
Pears

10. CARE AND CLEANING

WARNING!
Refer to Safety chapters.
10.1 Notes on cleaning
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a
dedicated cleaning agent.
• Clean the appliance interior after
each use. Fat accumulation or other
food remains may result in a fire. The
risk is higher for the grill pan.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
10.2 Stainless steel or
aluminium appliances
Clean the oven door with a
damp cloth or sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids
or abrasive materials as they
can damage the oven
surface. Clean the oven
control panel with the same
precautions.
10.3 Cleaning the door gasket
• Regularly do a check of the door
gasket. The door gasket is around the
Temperature Time (h)
(°C)
60 - 70 8 - 10
60 - 70 6 - 8
60 - 70 6 - 9
Shelf position
1 position
3
3
3
frame of the oven cavity. Do not use
the appliance if the door gasket is
damaged. Contact an Authorised
Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
10.4 Catalysis
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Clean the inner glass of the oven door
with warm water and a soft cloth.
Remove all accessories.
The walls and the top of the cavity are
coated with catalytic enamel. It gathers
fat and dirt which burns off at high
temperatures without leaving a smell.
To support this self-cleaning process
heat the empty appliance regularly.
Spots or discolouration of
the catalytic surface have no
effect on its catalytic
properties.
During catalytic cleaning the
oven light is on.
1. Set the Catalysis function. Refer to
"Oven functions".
The display shows CATA and the
duration of the cleaning procedure (1
hour). You cannot change the duration,
but you can use the End function to
delay the start of the cleaning procedure.
2 positions
1 / 4
1 / 4
1 / 4