aqua technix AQUA VARIO Plus OKU Instructions De Montage Et D'utilisation page 22

Resetting
The motor can be reset to the factory settings
by pressing the "SET" button for at least 15 se-
conds. The motor stops and the three LEDs of
the fi xed speeds light up.
The display of the control unit switches off after 3
minutes without action.
After a power cut the pump restarts auto-
matically with the speed last set, or remains
stopped if it was stopped beforehand.
| 22
SET
1 2 3
OK
0
POWER ERROR
WG27.50.116-P
SET
1 2 3
OK
0
POWER ERROR
WG27.50.117-P