Sony STR-DA5800ES Mode D'emploi page 59

SHIFT
Numeric
buttons
RETURN/
EXIT O
Toggling between FM and AM
radio
1
Select "Listen" from the home
menu, then press
2
Select "FM/AM," then press
The FM/AM screen appears.
3
Select the band switch.
4
Press V/v to select "FM" or
"AM," then press
Tuning to a station
automatically (Auto Tuning)
1
Select the frequency indication
on the FM/AM screen.
2
?/1
D.TUNING
In case of poor FM stereo
reception
1
2
V/v/B/b,
INFO/
OPTIONS
HOME
3
4
Tuning into a station directly
(Direct Tuning)
.
Enter the frequency of a station directly by
.
using the numeric buttons on the remote
control.
1
.
2
Tips
• Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to an
AM station.
Press V/v.
V scans from lower to higher frequency
stations and v for scanning higher to
lower.
The receiver stops scanning whenever a
station is received.
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning, or
select the preset station you want
(page 60).
Press INFO/OPTIONS.
The options menu appears.
Note
You can set "FM Mode" in the options menu
when the frequency indication is selected, or
when called for in another situation.
Select "FM Mode," then press
Select "Monaural," then press
Press SHIFT, then press
D.TUNING on the FM/AM
screen.
Press the numeric buttons to
enter the frequency, then press
.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
.
.
continued
59 US