Sony STR-DA5800ES Mode D'emploi page 106

3
Adjust "Level," then press
To output the source sound
from adjacent speakers
You can output the source sound from adjacent
speakers so that you can adjust the balance
between the speakers.
1
Select "Phase Audio," then press
The Phase Audio screen appears.
2
Adjust the parameter, then press
• Off
• L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*,
SBR/SBL, SR/SL, SB/SL*, SBL/SL,
SL/L, LH/RH, L/SR, SL/R, L/RH, LH/R
*"SR/SB" and "SB/SL" appear when only one
surround back speaker is connected.
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Adjust "Level," then press
Center Analog Down Mix
Lets you set the analog downmix settings on or
off.
x Off
If the speaker pattern is set so that there is a
center speaker, this setting is set to "Off"
automatically.
x On
We recommend you set "Center Analog Down
Mix" to "On" to enjoy digital audio with high
quality sound when you do not have a center
speaker connected. Analog downmix works
when you set "Center Analog Down Mix" to
"On." This setting is also effective to input
signals from the MULTI CHANNEL INPUT
jacks.
106
US
. Note
• This function does not work in the following cases.
– "MULTI IN" is selected.
– Headphones are connected.
– There is a center speaker.
Speaker Impedance
.
Lets you set the speaker impedance. For
details, see "9: Setting up the receiver using
the Easy Setup" (page 47).
.
x 4 Ω
x 8 Ω
Distance Unit
Lets you select the unit of measurement for
setting distances.
x meter
The distance is displayed in meters.
x feet
.
The distance is displayed in feet.