SETTING UP YOUR HUMIDIFIER
Placement
Step 1
Kaz will not accept responsibility for property damage caused by water spillage.
Soak Filter
Step 1
Remove tank.
Step 1
Scent Pad
Remove tank and locate
Scent Pad slot.
WARNING: As long as your humidifier is on, the scent pad heater will also be
activated. This area can be warm to the touch.
NOTE: One complementary scent pad is included with your unit, replace with Vicks
Scent Pads, models VSP-19/VSP19-CAN or Vicks Sleepy Time Vapopad VBR-5, available
at most retailers or through Kaz Consumer Relations or www.kaz.com.
Select a firm, level location at least 6" (15cm) from
any walls for proper airflow. Place the humidifier on a
water-resistant surface, as water can damage furniture
and some flooring.
Step 3
Step 2
Soak the filter in cool water.
Insert new filter into unit
by gently folding and
DO NOT wring filter.
inserting into filter slot.
Step 2
Step 3
Open Scent Pad bag and
Install new Scent Pad into
remove old pad.
humidifier.
SETTING UP YOUR HUMIDIFIER (
'
.)
CONT
D
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by
turning counter-
clockwise
.
OPERATING YOUR HUMIDIFIER
Power
Step 1
Output
Step 1
CHANGING YOUR FILTER
NOTE: It is recommended that all maintenance be done in the kitchen or bathroom on a water
resistant surface. Remove water tank from unit before moving.
The filter should be changed every 1-3 months depending on your water quality. Keep in mind, depending
on your water quality, mineral deposits can still clog or discolor the filter, affecting its life and that of the
humidifier.
Step 2
Step 3
Fill tank with cool
Once the filled water
tap water.
tank has been placed
on the unit do not move
Replace tank cap. Tighten
humidifier. Doing so could
by turning clockwise
.
cause leakage and spills.
Place tank back on
humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE
THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Set fan speed to desired output:
High ( ) Max Moisture
Medium ( ) Everyday Moisture
Low ( ) Night time sound sleep mode