Product Features; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PST 18 LI Notice Originale

OBJ_BUCH-1204-002.book Page 16 Friday, June 14, 2013 2:03 PM
16 | English
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Battery charge-control indicator
4 Battery pack *
5 Battery unlocking button
6 Vacuum hose*
7 Vacuum connection
8 Saw blade storage
9 Base plate
10 Adjusting lever for orbital action
11 Dust cover for vacuuming
12 Guide roller
13 "Cut Control" base
14 Saw blade*
15 "Cut Control" viewing window
16 Contact protector
17 Saw blade holder
18 "PowerLight"
19 Handle (insulated gripping surface)
20 Splinter guard
21 Lead for the parallel guide
22 Scale for mitre angle
23 Screw
24 Cutting mark, 0°
25 Cutting mark, 45°
26 Locking screw for parallel guide*
27 Parallel guide with circle cutter*
28 Centring tip of the circle cutter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Jigsaw
Article number
Rated voltage
Stroke rate control
Orbital action
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
1 609 92A 09K | (14.6.13)
Jigsaw
Weight according to
EPTA-Procedure 01/2003

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 81 dB(A); Sound power level 92 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Cutting board: a
Cutting sheet metal: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
Henk Becker
PST 18 LI
Executive Vice President
3 603 K11 0..
Engineering
V= 18


-1
min 0 –2400
Robert Bosch GmbH, Power Tools Division
mm 20
D-70745 Leinfelden-Echterdingen
07.04.2010
mm 80
mm 12
mm 5
° 45
kg
(triax vector sum) and uncertainty K
h
2 2
=8 m/s , K=1.5 m/s ,
h
2 2
=5 m/s , K=1.5 m/s .
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools
PST 18 LI
1.9