Door Reversal Instructions - Danby DCR033B1BDB Guide D'utilisation Et Soins De Propriètaire

DOOR REVERSAL INSTRUCTIONS
• If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory.
1 Tilt the unit slightly towards the rear and prop it securely. Two
people are required to tilt the unit during the door reversal
process.
2 Remove the top right hinge cover.
3 Undo the screws. Then remove the hinge bracket.
4 Remove the top left screw cover.
5 Move the hinge hole cover from the left side to the right side.
Then lift the door and place it on a padded surface to prevent
it from scratching.
6 Remove the adjustable feet from both sides. Remove the
screws and the bottom hinge.
6
unscrew
Unscrew