Danby DCR033B1BDB Guide D'utilisation Et Soins De Propriètaire page 9

DOOR REVERSAL INSTRUCTIONS
7 Unscrew and remove the bottom hinge pin.
Turn the bracket over and replace the hinge
pin.
8 Re-attach the bottom hinge bracket on the left
side. Re-attach both adjustable feet. Re-attach the
lower door in the proper position, by fitting it on the
hinge.
9 Re-attach the door. Ensure that the door is aligned
horizontally and vertically so that the seals are
closed on all sides before finally tightening the
upper hinge.
10 Insert the upper hinge bracket and screw it to the
top of the unit.
11 Use a spanner to tighten it if necessary.
12 Re-attach the hinge cover and the screw cover.
13 With the door closed, check that the door is aligned
horizontally and vertically, and that the seals are
closed on all sides before finally tightening the bot-
tom hinge. Re-adjust the leveling feet as needed.
Unscrew
Screw
7
Screw