Playback Mode; Fm Radio; Fm Radio Station Playing; Storing A Radio Station In A Preset - Rotel RT-12 Manuel De L'utilisateur

14

Playback Mode

UPnP Servers
< Playback Mode
Queue
Turn the knob to select sub-menu 'Media Player' -->'Playback Mode', there
are 2 sub-menus, "Repeat" and "Shuffle". Select either Repeat, Shuffle
or both. A mark will indicate the selection made
REPEAT: Tracks are played one after another and will start from the first
track again when the last track is finished.
SHUFFLE: Plays tracks in random.
Note: If both REPEAT and SHUFFLE are on, The unit will first play the
list in random, after all tracks are played one time, it will continue to
play the list in random until STOP is pressed
Note: Using shuffle feature with large music libraries may not be
possible or may take an excessively long time. We recommend that
you create shorter playlists in Windows Media Player and then shuffle
these.

FM RADIO

Before listening to FM radio, make sure that the FM antenna have been
properly connected.

FM Radio Station Playing

1. Select FM Button from the source buttons
as below
95.25MHz
[No RadioText]
2. Turn the PUSH-SELECT knob
station. Turning it up or down one step at a time changes the frequency
one step. Turning it faster and the unit will scan for stations.
3. Use the UP/DOWN keys on the remote to manually search for FM
stations.
4. Press and hold the UP/DOWN keys on the remote to auto scan for
FM stations.

Storing a radio station in a preset

While a radio station is playing, push the memory button
the number of preset assigned from numeric pad
show preset saved. Up to 30 preset FM radio stations may be stored.

Playing a preset radio station

When a radio station is playing, you can switch to a preset station in
one of the following ways.
< Repeat
> Shuffle
N . The display will show
6
to change the frequency of radio
=
4 I
H , the display will
3
1. From the numeric pad
station.
* >
2. Press SKIP +/-
out preset numbers and corresponding station. Turn the knob to choose
the desired station, then press the knob to select it. Press FM
again to exit the preset menu and back to playing status.
3. Press the FM
selections
1. Display FM station currently tuned to.
2. Display Preset Menu.
3. Display FM settings Menu
Toggle to the Preset Menu and scroll through all the presets with the
PUSH-SELECT
From the remote, use the +/- PRESET
press the ENT key to select.

FM Settings Menu

Press the FM
are 3 sub-menu under FM setting
1. Scan Settings - Select between ALL STATION or Strong Stations
Only.
2. Audio Settings - Allow Stereo or Forced Mono
3. System - Select Factory default and shows the current software.
To make changes in the FM settings menu, turn the knob
front panel or the UP/DOWN keys on the remote. To make a change
press the knob
the ENT key.

RDS Broadcast Reception

This Rotel unit is equipped with RDS (Radio Data Systems) reception
capabilities. The RDS broadcast system provide additional functionality
to FM radio reception by transmitting encoded information along with
the radio signal. This signal is decoded by an RDS receiver and can
provide a range of informational features including:
1. A display of the station's identifying name (e.g. BBC1)
2. A display of the station's program content (e.g. ROCK or NEWS).
, then press
3. Traffic information broadcasts.
4. A scrolling text display for announcements or information.
5. Current time and date.
RDS broadcasting has been widely available in many European markets
for years. There are a large number of RDS stations and most users will
be familiar with the features and operation.
RT-12 DIGITAL GATEWAY
, press preset number of the desired
3 H
button on the front panel or PRESET +/-
7
6 N button. This toggles between the following 3
knob. Press the PUSH-SELECT
=
keys to select a PRESET and
K
button and toggle to the FM settings Menu. There
6 N
on the front panel. From the remote control, press
=
to call
K
button
6 N
key to select.
=
on the
=