Media Player; Upnp Servers; Clear Queue - Rotel RT-12 Manuel De L'utilisateur

English

Media Player

The Media Player feature allows you to play audio files (AAC, AIFF,
AU, FLAC, MP3,WAV and WMA (except lossless)) and playlists (M3U)
created by your computer's Media Player, such as Window Media Player
11 or 12. It has been verified to work on Windows 2000, Windows XP,
Windows Vista and Windows 7.
Note: File sharing may need to be enabled on your computer, and not
all Media Players will allow sharing of music files. Please refer to your
computer's manual for instructions.

UPnP Servers

Setting up UPnP Server in PC
1. Use Windows Media Player 11(or 12 if you use Windows 7)to setup
the PC as an UPnP Sever, click the 'Library' tab from Windows Media
Player 11 and select 'Media Sharing' to open the 'Media Sharing'
window to set the option.
2. Your PC will now prompt you that a device has attempted to connect
to your UPnP server. Please click Allow button.
Note: As of this writing, Windows Media Player 11 does not support
AAC decoding used by Apple as the default selection in iTunes. We
recommend that you change the default import setting to WAV, AIFF,
or MP3 formats for maximum compatibility across many devices.
You can set Windows Media Player to mirror your iTunes folders.
Windows Media Player 12 (for Windows 7) does support AAC.
3. Go into 'Media Player' menu, and select 'UPnP Servers' sub menu
by turning and pressing the PUSH-SELECT knob
for all available UPnP servers. It will display '[Empty]' if no UPnP servers
are found.
Internet Radio
My Stuff
< Media Player >
Settings
Play media files using UPnP Server.
1. After a successful scan, select your UPnP server by rotating the knob
if there is more than one UPnP server, highlight, then press the knob to
select the desired server.
2. RT-12 will list the options or folders available. This varies depending on
the setup of your music server, and version of software you are using. It
will typically show Music, Playlists options and [Search] as per examples
below. Enter "Music", and it will show the different options to find your
tracks, sorted by Artists, Albums, Genre etc..
< Music >
Playlists
[Search]
3. Once the desired track is found, push the knob to select. The selected
track will be displayed on the menu as the unit attempts to connect to the
music server. Before play starts, the track title, type of file, bit rate will
be shown. When play starts, elapsed time will be displayed instead
of file type.
"Track Title"
317kbps WMA
07:49
4. You can select more tracks or folders while the current track is still
playing by going to the desired track and pressing the ENT button on the
remote or the PUSH-SELECT knob
will be added to QUEUE and will be played in the order selected. Push
QUEUE button to call up the tracks waiting to be played.
9 B

Clear Queue

You can clear QUEUE by pressing the QUEUE button and selecting
[Clear Queue] or by going into QUEUE menu from the Media Player
submenu.
UPnP Servers
Playback Mode
< Queue >
You can also clear individual tracks in QUEUE by selecting the track and
press STOP button for 5 seconds.
8 J
. The unit will scan
=
< UPnP Servers
Playback Mode
Queue
<All music
All Artists
Album Artists
Genre
"Track Title"
01:12 317kpbs
07:49
for 5 seconds. The selected track(s)
=
< [Clear Queue]
13
>
>
>