After Use - Panasonic MK-F500 Instructions De Fonctionnement

AFTER USE

Cleaning
Pre-wash
The pre-wash enables easier cleaning. It can be used for the Knife Blade and Blender Unit. To pre-wash, simply
follow the steps below.
1 Food Processor
Put the used attachment inside the Bowl, fi ll the Bowl
with water until the attachment is submerged in water
(max. 500 mL). Place the Bowl Cover on top of the Bowl
and turn it clockwise until a 'click' sound is heard.
2
Food Processor: Turn the Rotary Switch to "PULSE" 5 ~
10 times.
Blender: Turn the Rotary Switch to select speed 2 and
operate for 10 ~ 20 seconds.
Wash these items by rinsing them under running water. Use neutral kitchen detergent if necessary. Proceed to
wipe them dry with a clean cloth.
Wash these items by rinsing them under running water, and clean carefully with a brush.
Use neutral kitchen detergent if necessary.
Note:
• These items are extremely sharp and should be handled with extra care while cleaning.
Avoid hitting these items on hard objects during the cleaning process.
• The Mill Container Base must not be washed, use Brush to clean.
GB20
100_160419_MK-F500_Second_EU(UZ50G155).indb


20
Blender
For the Blender Unit, fi ll 500mL of water into the Blender
Jug and cover with the Blender Lid. Plug-in the plug into
the socket.
3

Return the Rotary Switch to OFF position "0" and
unplug from the socket. Remove the attachments and
proceed for cleaning.



2016/04/19 16:58:39