Lenze ERBM R W Série Instructions De Montage page 30

3 Product description
Dimensioning conditions
Examples of the evaluation of the condition
The brake resistor cycle t
time t
brk,max
process cycle t
In the above example, the dimensioning condition is observed at
all times. In the example below, the dimensioning condition is
once not observed, which means that the brake resistor selected
is not suitable for the process specified. Use a brake resistor with
a greater power (shorter brake resistor cycle t
30
cyc,RB
= 10 s are given. The braking times t
are exemplary.
cyc,Prc
l
= 150 s and the max. total braking
and the
brk
).
cyc,RB
EDKRBM470R DE/EN/FR 6.0