Conductivity performance characteristics
Reference temperature
Repeatability
Compensated
temperature range
Temperature
compensation
Step response time, T90 ≤ 2.0 s
Temperature performance characteristics
Temperature
Measuring range
Step response time,
T90
Max. measuring error
Reference conditions
for max. measuring
error
Temperature coefficient
(factor of change in
process temperature of
25 °C)
Process conditions
Process temperature
Process pressure
SIP/CIP compability
www.baumer.com
25 °C, adjustable
< 0.5% FSR, > 1 mS/cm
–20 ... 150 °C
0.0 ... 5.0 % FSR/K,
adjustable
Free programmable
range
–20 ... 150 °C
≤ 15 s
± 0.4 K
Sensor incl. transmitter
at 25 °C ambient tempe-
rature
≤ 0.5 % FSR/K, AFI4
≤ 0.5125 % FSR/K,
AFI5 with sensor
cable 2.5 m
≤ 0.525 % FSR/K,
AFI5 with sensor
cable 5 m
≤ 0.55 % FSR/K, AFI5
with sensor cable
10 m
–20 ... 140 °C,
permanent
140 ... 150 °C,
max. t < 1 h
≤ 25 bar
< 60 min, at medium
temperature up to
150 °C
Operating Instructions
Conductivity measurement
CombiLyz AFI4/AFI5
Inductive conductivity transmitter
Sample time
Temperature coefficient
(factor of change in pro-
cess temperature of 25 °C)
Temperature coefficient
(factor of change in pro-
cess temperature of 25 °C)
(0 ... 500 µS/cm)
Ambient conditions
Operating
temperature
Degree of protection
(EN 60529)
Humidity
Insulation voltage
Vibration (sinusoi-
dal) (EN 60068-2-6)
Output signal
Conductivity/
concentration
Temperature
Relays
Current rating
Interface
Power supply
Voltage supply
Power-up time
≤ 0.3 s
≤ 0.1 % FSR/K
≤ 0.3 % FSR/K
–30 ... 80 °C, with DFON
touch screen
–40 ... 85 °C, without DFON
touch screen
IP67
IP69K, with appropriate
cable
< 98 % RH, condensing
500 V AC
1.0 mm p-p (2 ...13.2 Hz),
0.7 g (13.2 ... 100 Hz),
1 octave / min.
4 ... 20 mA
4 ... 20 mA + HART®
4 ... 20 mA
2 relays included in the
display
100 mA, max.
IO-Link 1.1
With HART® modem
With FlexProgrammer 9701
15 ... 35 V DC
18 ... 30 V DC, with IO-Link
≤ 10 s, without DFON touch
screen
≤ 16 s, with DFON touch
screen
15 / 52